Guide curb yellow
BASt-tested even WITHOUT bolting or gluing to the road surface!
- BASt-tested in accordance with TL guiding elements only in combination with Leitboy III
- NCHRP 350 tested by U.S. FHWA
- Anti-skid system also allows rainwater to drain
The individual elements of the guide curb are connected to each other by an extremely stable metal hook.
The stable, yet flexible, connection ensures sufficient leeway to install the guide curb in different curve radii. (90° angle on approx. 11 x 11 m).
The anti-skid system (ARS) on the underside of the guide curb ensures excellent grip on the road surface. It can be easily replaced when worn without great effort.
horizont guide curb does not need to be glued to the road. Additional fastening with ground screws is also not necessary but possible. The lateral guide rails - climbing edges - help to ensure that the separator is pressed firmly onto the road surface by the weight of the vehicle when it comes into contact with the car tyre.
Guide curb can be fitted with Leitboys/Mini-Leitboys (markers) of various sizes and different designs or Leitboy bollards.
- BASt-tested in accordance with TL guiding elements only in combination with Leitboy III
- NCHRP 350 tested by U.S. FHWA
- Anti-skid system also allows rainwater to drain
- With coupling hook and locking screw
- Guide curbs are traffic devices (VZ 628 + VZ 629) and can therefore be the subject of an order under traffic law. (cf. RSA21)
- Guide curbs can take over the function of temporarily valid markings. (cf. RSA21)
- yellow
- 8 exchangeable anti-skid studs
- lateral climbing edges
- Can be laid in curves: 90° on approx. 11 x 11 m
- break-proof
- resistant to frost, salt, exhaust gases, oil etc.
Product safety information
| Responsible person | manufacturer information | |
|---|---|
| RTS Recover-Trading-Services GmbH | |
| Am Kirschberg 5 | |
| 07570 Harth-Pöllnitz | |
| Germany | |
| phone: +49 151 57722984 | |
| E-Mail: andreas.huth@rts-mail.com |
