RS 2000 PLUS, Master lamp, sequential light system

RS2000PLUS LED master lamp for sequential light system, with 5 m battery cable and 15 m connection cable.

Also available as set of 10 lamps total (1 master lamp ref. 20900, 9 supplement lamps ref. 20900), ref. 20900-02.

You can select from three programmes via switches: sequential guiding light, progressive guiding light and progressive/degressive light. 

Customized lamps can be programmed at horizont if there a special requirements concerning programme or light intensity.

• Only the master lamp contains the supply cable. 
• Up to 32 lamps can be connected in a system.
  ==> Usually there are 10 lamps in a system, which are preset at the factory. The respective position number can be changed on site at any time without great effort. To do this, the DIL switch 1 must be set accordingly. The manual is required to set the position number. The position number, if not preset at the factory, should be noted on the spotlight.
• Programmes are set via DIL switch 2.
  ==> a sequential guiding light, progressive guiding light or progressive guiding/descending sequence are preset
• Individual programmes (light pattern and luminosity) can be implemented after consultation, but before purchase.
• The system has automatic fault detection
• The system checks the voltage during commissioning and emits a warning via an illuminated image (5 rapid flashing frequencies)
• The system switches off in the event of undervoltage to protect the battery from deep discharge
• Automatic dimming
• Backlighting possible depending on the light pattern
• Operating voltage with 12 & 24 volts possible, automatic detection.